Details

---

Weberset Super Star  瓷砖粘合剂


DESCRIPTION

---

▪ Ensure the substrate is dry, sound, flat/true, and free of contaminants.
▪ Fix ceramic tiles dry; do not soak in water.
▪ Mix weberset super star with water (or latex admixture) according to the recommended ratio. Mechanical mixing is recommended.
▪ Spread adhesive onto the substrate at a bed thickness of 3 - 6 mm (thickness may vary depending on tile size and thickness) using a suitable notched trowel.
▪ Apply adhesive over no more than 1 m² at a time to prevent skin-over.
▪ Promptly place tiles onto the adhesive bed, twisting slightly to ensure good contact (solid bed fixing).
▪ Periodically touch the adhesive bed to check for skin-over. If the adhesive bed is no longer tacky/sticky, re-trowel the adhesive.
▪ Maintain joints approximately 2-3 mm wide between tiles.
▪ Remove excess adhesive from the tile surface and joints before it hardens.
▪ Allow to set for 24 hours before beginning grouting.


FEATURE & BENEFITS

---

▪ Do not use adhesive in temperatures lower than 5°C or in damp conditions.
▪ C1 tile adhesive with good bond strength, containing 100% silica sand filler
▪ Ideal for swimming pools and wet areas


USES

---

Suitable for fixing Ceramic Wall & Floor Tiles, Vitrified Homogeneous Tiles, Porcelain Tiles, Mosaics, Quarry Tiles, Terracotta, Marbles, Granites, Slates, Terrazzo, Brick Veneer, Decorative Stones etc., to wall & floor, dry or wet, interior or exterior areas including swimming pools.


COLOUR

---

Grey


PACKAGING

---

▪ 20 kg / bags